Iem		Unit	FPS-E80PC	FPS-E85	FPS-E90	FPS-E100	FPS-E110	FPS-E120
Basic Info	Material	/	PE, PP…	PE, PP…	PE, PP…	PE, PP…	PE, PP…	PE, PP…
	Accumulator type of head	set	1	1	1	1	1	1
	Max. container capacity	L	25	30	60	120	150	250
	Machine dimension	M	6.2*2.5*3.8	4.5*2.5*3.5	5.2*3*4.2	6*3*4.4	6.0*2.9*4.5	7.5*3.2*5.5
	Total weight	T	10	10	14	18	21	38
Extrusion system	Screw diameter	mm	82	85	90	100	110	120
	Screw L/D ratio	L/D	24/1-	24/1-	24/1-	24/1-	24/1-	24/1-
	Plasticizing capacity (HDPE output)	Kg/h	150	100-110	120-140	160-180	200-250	260-330
	Number of the heating zone	KW	8	4	5	5	5	6
	Screw heating power	KW	16	16	20	25	30	36
	Power of screw-fan machine	KW	0.75	0.75	0.75	0.75	0.75	0.75
	Extruder driving power	KW	37	22-30	30-37	37-45	75	90
Die-head system	Number of the heating zone	ZONE	6	5	5	5	5	6
	Power of Die heating	KW	12	15	20	25	30	36
	Max. Die head	Mm	280	300	380	450	510	620
	Accumulator capacity	L	4.5	5	6.5	15	22	30-35
Clamping system	Clamping force	KN	400	400	500	750	1000	1500
	Max. size of mold	mm	550*700	550*700	680*980	880*1200	900*1400	1500*1600
Power consumption	Power of oil pump	KW	37	22	22.5	37	30	37
	General power of machine	KW	108	80	100	120	170	200
	Average energy consumption	KW	40	30	38	45	64	75
Others Info	Air pressure	MPa	1	0.8	0.8	0.8	0.8	0.8
	Air consumption	M3/min	1	0.8	1	1.6	1.2	1.6
	Cooling water pressure	MPa	0.3	0.3	0.3	0.3	0.3	0.3
	Water consumption	L/min	120	60	80	150	180	240